RUGGEDCOM ROX II
CLI User Guide
Chapter 6
Security
Associating an Interface with a Zone
195
7. Configure a broadcast address for the interface. For more information configuring a broadcast address, refer
Section 6.9.10.4, “Configuring a Broadcast Address”
8. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.9.10.3
Associating an Interface with a Zone
To associate an interface with a pre-defined zone or mark the associated zone as undefined, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to
security » firewall » fwconfig » {firewall} » fwinterface{interface} » zone
, where
{firewall}
is
the name of the firewall and
{interface}
is the name of the interface.
3. Configure the following parameter(s) as required:
Parameter
Description
predefined-zone { predefined-zone }
Synopsis:
A string
A pre-defined zone
undefined-zone
This is used in conjunction with hosts definitions.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.9.10.4
Configuring a Broadcast Address
To configure a broadcast address for an interface, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to
security » firewall » fwconfig » {firewall} » fwinterface{interface} » broadcast-addr
, where
{firewall}
is the name of the firewall and
{interface}
is the name of the interface.
3. Configure the following parameter(s) as required:
Parameter
Description
ipv4-address { ipv4-address }
Synopsis:
A string
An IPv4 address for a broadcast address.
detect
Automatic detection of the broadcast address(es).
none
The default.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.9.10.5
Deleting an Interface
To delete an interface, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the interface by typing:
Summary of Contents for RUGGEDCOM ROX II
