Siemens RUGGEDCOM ROX II, User Manual

Page: 218 / 798

Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
172 Deleting a CA Certificate from the Trusted Certificate Store
Section 6.8.3.3
Deleting a CA Certificate from the Trusted Certificate Store
To delete a CA certificate from the Trusted Certificate Store, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the static VLAN by typing:
no admin system-ca-certificates configured-cas certificate
Where
certificate
is the chosen CA certificate.
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 6.8.4
Managing CA Certificates and CRLs
This section describes how to view, add and delete Certified Authority (CA) certificates and Certificate Revocation
Lists (CRLs) on the device.
CONTENTS
• Section 6.8.4.1, “Viewing a List of CA Certificates and CRLs”
• Section 6.8.4.2, “Viewing the Status of a CA Certificate and CRL”
• Section 6.8.4.3, “Adding a CA Certificate and CRL”
• Section 6.8.4.4, “Deleting a CA Certificate and CRL”
Section 6.8.4.1
Viewing a List of CA Certificates and CRLs
To view a list of certificates issued by a Certified Authority (CA) and the Certificate Revocation Lists (CRLs)
associated with them, type:
show running-config security crypto ca
If certificates have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config security crypto ca security crypto ca ca-cert key-cert-sign-certificate
"{--contents--}" ! ! !
If no certificates have been configured, add certificates as needed. For more information, refer to Section 6.8.4.3,
“Adding a CA Certificate and CRL” .
Section 6.8.4.2
Viewing the Status of a CA Certificate and CRL
To view the status of a CA certificate, type:
show security crypto ca
certificate
key-cert-sign-certificate-status
Where: