Siemens RUGGEDCOM ROX II, User Manual

Page: 127 / 798

RUGGEDCOM ROX II
CLI User Guide
Chapter 4
Device Management
Managing the Software Configuration 81
no admin logging server address selector name
Where:
•
address
is the IP address of the remote server
• name is the name of the log selector identifier
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 4.11
Managing the Software Configuration
Configuration parameters for RUGGEDCOM ROX II can be saved on the device and loaded in the future.
CONTENTS
• Section 4.11.1, “Saving the Configuration”
• Section 4.11.2, “Loading a Configuration”
Section 4.11.1
Saving the Configuration
To save the configuration settings for RUGGEDCOM ROX II as a separate file, type:
admin
full-configuration-save format cli file-name filename
Where:
•
filename
is the name of the configuration file
Alternatively, to include only the default configuration parameter values in the saved configuration file, do the
following:
1. Make sure the CLI is in Configuration mode.
2. Save the default values by typing:
save
filename
| details
Where:
•
filename
is the name of the configuration file
If required, once the configuration file has been saved, back it up to a USB mass storage drive. For more
information, refer to Section 4.9.2, “Backing Up Files” .
Section 4.11.2
Loading a Configuration
To load a configuration file for RUGGEDCOM ROX II, do the following: