Siemens RUGGEDCOM RMC, Installation Manual

Page: 23 / 34

RUGGEDCOM RMC
Installation Guide
Chapter 4
Technical Specifications
Power Supply Specifications 17
Technical Specifications
This section provides important technical specifications related to the device and available modules.
CONTENTS
• Section 4.1, “Power Supply Specifications”
• Section 4.2, “Copper Ethernet Port Specifications”
• Section 4.3, “Fiber Optic Ethernet Port Specifications”
• Section 4.4, “Supported Networking Standards”
• Section 4.5, “Operating Environment”
• Section 4.6, “Mechanical Specifications”
Section 4.1
Power Supply Specifications
Power Supply Type Minimum Input Maximum Input Internal Fuse Rating
a
Max. Power
Consumption
24 VDC 18 VDC 36 VDC
48 VDC 36 VDC 59 VDC
88 VDC 300 VDC
HI
b
85 VAC 264 VAC
3.15A (T) 3 W
a
(T) denotes time-delay fuse.
b
This is the same power supply for both AC and DC.
Section 4.2
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM RMC.
Speed
c
Connector Duplex
c
Cable Type
d
Wiring
Standard
e
Maximum
Distance
f
Isolation
g
10/100Base-TX RJ45 FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
c
Auto-negotiating.
d
Shielded or unshielded.
e
Auto-crossover and auto-polarity.