Siemens RUGGEDCOM RMC, Installation Manual

Page: 19 / 34

RUGGEDCOM RMC
Installation Guide
Chapter 3
Communication Ports
Copper Ethernet Ports 13
Communication Ports
The RUGGEDCOM RMC can be equipped with various types of communication ports to enhance its abilities and
performance.
2
1
Figure 7: Port Assignment
1. Port 1 2. Port 2
Port Type
1 Copper Ethernet Port
2 Copper Ethernet Port
CONTENTS
• Section 3.1, “Copper Ethernet Ports”
• Section 3.2, “Fiber Optic Ethernet Ports”
Section 3.1
Copper Ethernet Ports
The RUGGEDCOM RMC supports a single 10/100Base-TX Ethernet port that allows connection to a standard
Category 5 (CAT-5) unshielded twisted-pair (UTP) cable with an RJ45 male connector. The RJ45 receptacles are
directly connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.