Siemens RUGGEDCOM MX5000RE, Reference Manual

Page: 71 / 148

RUGGEDCOM NETCONF
Reference Guide
Chapter 6
RUGGEDCOM ROX II Actions
restore-factory-defaults 59
</admin>
</data>
</action>
</rpc>]]>]]>
• {time}
The date and time in the format YYYY-MM-DD HH:MM:SS.
Section 6.1.11
restore-factory-defaults
This action restores the device to its factory default settings. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<restore-factory-defaults/>
</admin>
</data>
</action>
</rpc>]]>]]>
Section 6.1.12
delete-logs
This action deletes all log files on the device. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<delete-logs/>
</admin>
</data>
</action>
</rpc>]]>]]>
Section 6.1.13
install-files
This action copies files from a specified URL to the device. Parameters include
<file-type>
and
<url>
.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<install-files>
<file-type>{fileType}</file-type>
<url>{url}</url>
</install-files>
</admin>
</data>
</action>