Siemens RUGGEDCOM M969F, Installation Manual

Page: 51 / 56

RUGGEDCOM M969F
Installation Guide
Chapter 7
Certification
ISED 41
Section 7.1.5
ISED
This device is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation Science
and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)
This device further complies with IC RSS-210 and is approved under the ID 4997A-VG5RW80G.
Section 7.1.6
RoHS
This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
•
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at https://support.industry.siemens.com/cs/ww/en/
view/109738831 .
Section 7.1.7
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General Requirements
• NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
• MIL-S-901D
MIL-S-901D – Military Specification – Shock Tests. H.I. (High-Impact) Shipboard Machinery, Equipment, and
Systems, Requirements For
Section 7.2
MIL-STD Test Specifications
Test Description
MIL-STD-167 Vibration Navy MIL-STD –167-1 Type I