Siemens RUGGEDCOM M969F, Installation Manual

Page: 34 / 56

Chapter 5
Technical Specifications
RUGGEDCOM M969F
Installation Guide
24 Copper Ethernet Port Specifications
Maximum Switching Voltage Rated Switching Current Isolation
220 VDC 0.24 A, 60 W
250 VAC 0.25 A, 62.5 W
Section 5.3
Copper Ethernet Port Specifications
Data Port 10/100 Mbps
Media CAT-5 UTP or STP
Distance 100 m (328 ft)
Connector Type RJ45 or M12
Section 5.4
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM M969F.
Fast Ethernet Optical Specifications
Tx (dBm)
Mode Connector
Cable
Type (µm)
Tx λ (nm)
c
Min Max
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Typical
Distance
(km)
Power
Budget
(dB)
SM LC 9/125 1300 -15 -8 -32 -3 20 17
SM LC 9/125 1300 -5 0 -35 3 50 30
SM LC 9/125 1300 0 5 -37 0 90 37
MM LC 50/125 850 -22.5 -14 -31 -14 2 8.5
c
Typical.
Gigabit Ethernet Optical Specifications
NOTE
• All cabling is duplex type unless otherwise specified.
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages. To convert from average to peak, add 3 dBm.
To convert from peak to average, subtract 3 dBm.