Siemens RUGGEDCOM M2200, Installation Manual

Page: 32 / 50

Chapter 4
Communication Ports
RUGGEDCOM M2200
Installation Guide
22 Copper Ethernet Ports
1
Figure 14: Port LEDs
1. Port LED
LED State Description
Yellow (Solid) Link established
Yellow (Blinking) Link activity
Off No link detected
CONTENTS
• Section 4.1, “Copper Ethernet Ports”
• Section 4.2, “Fiber Optic Ethernet Ports”
Section 4.1
Copper Ethernet Ports
The RUGGEDCOM M2200 supports several 10/100Base-TX and 10/100/1000Base-TX Ethernet ports that allow
connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with Micro-D male connectors.
The Micro-D connectors are directly connected to the chassis ground on the device and can accept CAT-5 shielded
twisted-pair (STP) cables.
Pin-Out
The following is the pin-out description for the Micro-D connectors:
1
6
Figure 15: Micro-D 10/100/1000Base-TX Port Pin
Configuration
Name
Pin
10/100Base-TX 1000Base-TX
Description
1 RX+ BI_DA+ Receive Data+
or Bi-Directional
Pair A+
2 RX- BI_DA- Receive
Data- or Bi-
Directional Pair A-
3 TX+ BI_DB+ Transmit Data+
or Bi-Directional
Pair B+
4 Reserved (Do
Not Connect)
BI_DC+ Transmit Data+
or Bi-Directional
Pair C+
5 Reserved (Do
Not Connect)
BI_DC- Receive
Data- or Bi-
Directional Pair C-