CE1P2276E / 31.03.1999
Basic Documentation REA22
Issue 2.0
Siemens Building Technologies
16/30
Description of end-user settings
Landis & Stefa Division
3.3.2 Check settings of the 7-day time switch
The controller offers the possibility to check your settings of the 7-day time switch mode.
Proceed as follows:
Auto 1...7
Move the operating mode selector to the position at the top.
Day
1
6
1
-
-
...
5
7
7
Press button. The switching patterns set for the individual
days are shown in consecutive order.
If corrections have to be made on your settings, proceed as described in the previous
section.
3.3.3 24-hour mode with one heating period
The controller can be assigned to a 24-hour switching pattern with one heating phase.
Proceed as follows:
Move the operating mode selector to 24-hour mode with one heating
period, enabling its block and switching pattern to be set. With that, you
will afterwards use the 24-hour setting with one heating period.
P.1
Select the switching position (e.g. P.1) and press
to enter
the required switching time.
Enter switching position P.2 accordingly.
T1
Select the temperature position (e.g. T1) and press
to enter
the required temperature.
T1 is the temperature between the switching
points P.1 and P.2.
Select «Economy temperature» and press
to enter the re-
quired value.
Auto
Run
Move the setting slider back to this position and close the cover.
If a position cannot be set, the display shows
.
Note
Note
