background image

9

disallow access to the system. The
RDM-PC will indicate a logging error
message when a login attempt is made.

Up to 8 login names can be programmed. Use the

Prev 

and 

Next 

options to step through each login

name.

NOTE

:  Depending on the password you entered

at startup (password entered after typing
MENU), you may not have access to all
login names. 

For example

, if you entered

a password for entry number 7, you can
only access the login details for entry 7
and entry 8. The password for entry
number 1 has full access and can config-
ure details for all logins.

IF TROUBLE IS EXPERIENCED WITH the
RDM-MXL, please contact the Siemens Indus-
try, Inc., Technical Support Department at
(800) 248-7976.

U.S.A. - FCC EQUIPMENT LIMITATIONS:

• An FCC Part 68 compliant telephone cord

must be used.

• This equipment complies with Part 68 and

Part 15 of the FCC rules. On the back of the
RDM-MXL is a label that contains, among
other information, the FCC registration
number and ringer equivalence number (REN).
If requested, this information must be
supplied to the telephone company.

• The REN is used to determine the quantity of

devices which may be connected to the
telephone line. Excessive RENs on the
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of RENs
should not exceed 5. To be certain of the
number of devices that may be connected to
a line, as determined by the total RENs,
contact the local telephone company.

• If the RDM-MXL causes harm to the

telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn’t practical, the
telephone company will notify the customer
as soon as possible. Also, you will be advised
of your right to file a complaint with the FCC
if you believe it is necessary.

• The telephone company may make changes

in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the telephone
company will provide advance notice in order
for you to make necessary modifications to
maintain uninterrupted service.

Summary of Contents for RDM-MXL













Reviews: