2 / 26
A6V11562447_en--_a
en
Initiating the connection to the RDS110.R
1.
On the Home screen of the RDS110.R
, tap , then and . The
Advanced settings
screen
is displayed.
2.
Enter the administrator password at the prompt.
3.
Tap > , and then
Pair new devices
.
4.
On the receiver (RCR114.1)
, short press button
. The LED flashes green.
5.
Perform the above action on all receivers if you have more than one RCR114.1. The LED
flashes green while connection is established and turns to steady green when it succeeds.
Note:
One RDS110.R can pair up with max. 6 relays (for heating systems) and max. 3
repeaters (for network extension).
LED indication
Device status
LED status
Idle
Solid orange
Connecting to RDS110.R
Flashing green
Successful connection
Solid green
Thread network works, but communication with
RDS110.R failed
1)
Flashing red
Thread network failure
2)
Solid red
Factory reset
Alternating red and green
1) Reconnection is performed automatically or manually.
2) Reconnection can only be performed manually.
Manual network reconnection
1.
Check whether RDS110.R is powered on and in normal operation.
2.
If the reconnection still fails, delete RCR114.1 in the device list of RDS110.R, then long press
button on RCR114.1 for 8 seconds and re-add RCR114.1 to the device list.
Technical specifications and availability subject to change without notice.
Siemens Switzerland Ltd. declares that the radio equipment type RCR114.1 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
Summary of Contents for RCR114.1
Page 29: ......
