Siemens RAV12 series, User Manual

Page: 5 / 8

Siemens Building Technologies CE1N2226E / 01.02.2000
Landis & Staefa Division 5/8
•
The room temperature controller should be fitted in the main living room.
•
The place of installation should be chosen so that the sensor can capture the room
temperature as accurately as possible, without being affected by direct solar radia-
tion or other heating or cooling sources.
•
Mounting height is approx. 1.5 m above the floor.
•
The unit can be fitted to most commercially available recessed conduit boxes or di-
rectly on the wall.
•
When installing the room temperature controller, the base plate must first be fitted
and wired. Then, the unit is engaged at the top, swung downward and secured with a
screw.
•
For more detailed information, please refer to the installation instructions supplied
with the controller.
•
For the electrical installation, the local safety regulations and standards must be
complied with.
•
The control characteristics can be changed with the help of the DIP switches located
at the rear of the unit.
•
If the reference room is equipped with thermostatic radiator valves, they must be set
to their fully open position.
•
If the measured room temperature does not agree with the set room temperature on
the setting knob, the detector should be recalibrated (please refer to "Calibration of
detector").
Operating voltage AC 230 V
- conformity to
EEC directive 89/336/EEC
low voltage directive 73/23/EEC
Switching capacity of relays
Voltage AC 24…250 V
Current 8 (3.5) A
Measuring element NTC 68 k
Ω
at 25 °C
Measuring range 0…40 °C
Time constant 2 min max.
Set point setting range
Normal temperature 3…29 °C
Economy temperature 3…29 °C
Resolution of analogue time switches
24-hour time switch 15 min
Weekly time switch 60 min
Set point for frost protection 5 °C
Insulation class
to EN 60730-1 II
Degree of protection
to EN 60529 IP 30
Electromagnetic compatibility
Immunity EN 50082-2
Emissions EN 50081-1
Perm. ambient temperature
Operation 3…35 °C
Storage -25…+60 °C
Perm. ambient humidity
to DIN 40040 G
Weight 0.2 kg
Colour White
RAL 9003
Notes
Engineering
Fitting and installation
Commissioning
Technical Data