Siemens QAA73.110 Basic Documentation Download Page 16

Page: 16 / 70

16/70

Siemens Building Technologies

Basic Documentation QAA73.110 Room unit

CE1P2284en

HVAC Products

Handling

10.07.2002

2.7 Parameter settings for the heating engineer

Room unit configuration and parameter settings to be made by the heating engineer.

Buttons

Explanation

Line

P RO G

Press one of the 2 line selection buttons.

This will take you first to the programming level
"Enduser”.

P RO G

Press both line selection buttons for at least 3
seconds.

This will take you to the programming level "Heating
engineer”.

P RO G

Press the line selection buttons to select the required
line.

The parameter list on the next pages contains all
available lines.

. . .

Press the + or – button to set the required value.
The setting will be stored as soon as you leave the
programming mode or change to another line.

The parameter list on the next pages contains all
settings that can be made.

You leave the programming level "Heating engineer"
by pressing the Info button.

Continuous

display

If no button is pressed for about 8 minutes, the room unit will automatically return to the
Info level.

Description

Setting

Note

Summary of Contents for QAA73.110







































































Search results

Summary of Contents for QAA73.110

Reviews:

Related manuals for QAA73.110

Brands by name

Popular brands

Siemens QAA73.110, Basic Documentation

Search results

Summary of Contents for QAA73.110

Reviews:

Related manuals for QAA73.110

Brands by name

Popular brands