Siemens optiPoint410economy Page 97 Operating Instructions Manual Download

Page: 97 / 126

Making multiline calls

Step by Step

Identifying the line used

If several lines are seized at the same time, you can find
out which line you are conversing on.

With the Show Used Line key configured:

Press the key.

Via the program/service key:

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

The number and status of the line currently in use are
displayed.

A display such as "3235 active" means:
the selected line (3235) is being used.

Alternating between different lines

Precondition 1:

The service personnel has specified

that when the user switches between lines, the lines
are placed on hold automatically and can only be
cleared again by replacing the handset or by pressing
the Disconnect key.

Precondition 2:

You are connected to various other par-

ties on two or more lines. These can be either calling
parties

page 90 or called parties

page 92.

You are conducting a call on line 1, for example. The line
key of the party on hold flashes slowly.

Press the slowly flashing line key. The first party is on
hold on line 1.

Press the slowly flashing line key. The second party is
on hold on line 2.

You can alternate between the parties as often as you
wish.

Show used line

program/service

More features?

Show used line?

Line 2

Line 1

Summary of Contents for optiPoint410economy































































































































Search results

Summary of Contents for optiPoint410economy

Reviews:

Related manuals for optiPoint410economy

Brands by name

Popular brands

Siemens optiPoint410economy, Operating Instructions Manual

Search results

Summary of Contents for optiPoint410economy

Reviews:

Related manuals for optiPoint410economy

Brands by name

Popular brands