Siemens optiPoint410economy Page 92 Operating Instructions Manual Download

Page: 92 / 126

Step by Step

Making multiline calls

Dialing with line keys

Your telephone can be configured with either

auto-

matic

selectable

line seizure. The service personnel

specifies whether a line (and which line) is seized auto-
matically when the handset is lifted or when speaker-
phone (only available with optiPoint 410 standard) is ac-
tivated.

Dialing with automatic line seizure:

Lift the handset.

Press the key.

The display briefly indicates the line number and the line
status and then prompts you to dial.

A display such as "3235 active" means:
a line (3235) has been selected automatically.

The selected key’s lamp lights up.

Enter the number.

Dialing with selectable line seizure:

Lift the handset.

Press the key.

You are prompted to press a free line key:
"Please select a line".

Press the free line key. The lamp lights up.

The display briefly indicates the line number and the line
status and then requests you to dial.

A display such as "3236" means:
the selected line (3236) has been seized.

Enter the number.

The display "Please select a line", that you receive
after lifting the handset or pressing the loud-
speaker key, instructs you to seize a line.

Summary of Contents for optiPoint410economy































































































































Search results

Summary of Contents for optiPoint410economy

Reviews:

Related manuals for optiPoint410economy

Brands by name

Popular brands

Siemens optiPoint410economy, Operating Instructions Manual

Search results

Summary of Contents for optiPoint410economy

Reviews:

Related manuals for optiPoint410economy

Brands by name

Popular brands