Active Speaker
43
De
u
ts
c
h
English
Fr
ançais
Nederlands
It
aliano
Español
P
o
rt
ug
uês
Installation
Prerequisite:
the appropriate adapter is already correctly installed in the tele-
phone.
1. Turn the
knob
on the front panel of the loudspeaker all the way to the
left
(lowest volume).
2. Insert the 8/8 Miniwestern plug of the Y cable into the
connection socket
of the adapter.
3. Insert the connection cable plug into the connection socket of the Y cable.
4. Insert the elbow plug supplied with the
plug-in power unit
into the round
socket on the base of the loudspeaker.
5. To avoid acoustic feedback,
do not
set up the loudspeaker
facing the tele-
phone or desk microphone
.
6. Insert the plug-in power unit in the
230 V socket
.
The
ready-status indicator
(LED) on the front panel of the loudspeaker
lights up.
7.
Set base volume:
The
knob
on the loudspeaker is only used to set the base volume that suits
the room conditions. Once this is set, it should
not be changed.
Procedure for setting the base volume:
•
Set the
telephone loudspeaker
volume to the
lowest position
and save,
see telephone operating instructions.
•
Press the "Loudspeaker" key to activate open listening.
•
Set the base volume (normal volume) using the dial tone, for example, or dur-
ing a call with the knob on the loudspeaker.
Operation
The open listening function is activated and deactivated with the "Loudspeaker"
key on the telephone. The current volume of the loudspeaker should be only
changed (if necessary) with the keys "+" and "–" on the telephone.
Warning!
Only use the plug-in power unit supplied!
Summary of Contents for optiPoint application module
Page 2: ...2 ...
