Siemens optiPoint 500 entry, Operating Instructions Manual

Page: 31 / 50

Forwarding calls
31
31 31
31
Step by Step
Press the key. The lamp goes out.
Call forward ing is thus activated.
Storing a destination for fax, PC
or "busy"/activating call forwarding
Press the key. The lamp lights up.
E
Enter the code for the type of call forwarding required.
The codes are defined by System Suppor t. You can en-
ter your call forwarding codes in the following table:
EG
Enter the number of the other terminal and confirm
your input with the square key.
EG
Enter the PIN of the other terminal and confirm your in-
put with the square key.
or
G
Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
EG
Enter the number of the destination and confirm your
input with the square key.
or
G
Press the square key only
(the terminal at which you are storing call forwarding
thus becomes the call forwarding destination).
Press the key. The lamp goes out.
Call forward ing is thus activated.
Deactivating call forwarding for another
telephone
G:=
or
G=::
UK code or Standard code/Euro code.
or Enter the code which has been programmed for you.
EG
Enter the number of the other telep hone and confirm
your input with the square key.
EG
Enter the PIN of the other telephone and confirm your
input with the square key.
Store
Store
"Call forwarding for fax": *43
"Call forwarding for PC": *42
"Call forwarding for b usy": *49
Store
Ente r th e code !