manualshive.com logo in svg

Siemens OpenStage SL4 professional, Documentation, Page: 14 / 93

Share
Download
Siemens OpenStage SL4 professional Documentation Download Page 14

Putting the handset into service

14

Inserting/changing the battery

The handset is supplied with an approved battery. The battery is not 

charged when supplied. It is first charged in the handset.

1. If installed: Remove the attachment clip

Insert a screwdriver between the attachment clip and the battery cover (1) 

and force the attachment clip outward (2) until it dislodges.

Likewise dislodge the clip on the opposite side and then remove it.

Caution:

• Please observe the safety notes 

Æ

 on the back cover.

• Only use approved batteries 

Æ

Page 84!

• Open the battery compartment in a dust-free environment only.

• Your phonebook entries and all settings remain stored even if 

you remove the battery. The date and time settings will be 

reset.

• Only remove the battery if it is defective. The battery's life 

diminishes each time it is removed.

2

1

Summary of Contents for OpenStage SL4 professional






























































































Reviews:

No comments