Siemens OpenStage 60 T User Manual Download

Page: 18 / 199

Getting to know your OpenStage phone

Keys and controls

Function keys

Audio controls

Audio keys

TouchSlider

Similar to the TouchGuide

page 20, you can set properties for your tele-

phone, such as the volume, by sliding your finger over the TouchSlider.

The blue illuminated slider control displays the volume setting for the cur-
rent tone (ring tone, handset tone and loudspeaker tone). You can adjust
the volume by moving the slider left or right.

Set the lamp brightness of the TouchSlider

page 157.

Key

Function when key is pressed

End (disconnect) call

page 49.

Call forwarding

[1]

page 79.

[1] If the LED key flashes on the phone, your phone was configured as a forwarding destina-

tion.

Key currently has no function.

Key

Function when key is pressed

Activate/deactivate the loudspeaker

page 44.

Activate/deactivate headset

page 55.

Activate/deactivate microphone (also for speakerphone mode)

page 50.

Icon used in the manual:

Summary of Contents for OpenStage 60 T








































































































































































































Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands

Siemens OpenStage 60 T, User Manual

Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands