Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 50 / 120

Step by step

Making Calls – Convenience Functions

During a call

Call waiting with a direct station selection
key

Prerequisite:

You have configured direct station selec-

tion keys on your telephone

page 16 and

page 73.

The line of the party you wish to call is busy.

Press the DSS key.

The called party accepts your waiting call.

Lift the handset.

Press the key and enter speakerphone mode.

Using call waiting

You can specify whether you wish to accept a second
call (call waiting) during a call.

Activating/deactivating second call

Open the service menu

page 26.

Select and confirm.

For information on the meanings of the LED dis-
plays of the DSS keys, see

page 16.

If your belongs to an ONS group (parallel call

page 112), please note the following:

In addition to an alert tone on the busy phone,
the second call is signaled with a ring tone on the
other phones in the ONS group.

Feature settings?

Camp-on?

Activate?

Deactivate?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands