Install internal components
Operating unit and call stations PT1002-A1
6
70 | 121
A6V11940317_en--_a
6.2 Operating unit and call stations PT1002-A1
The 'System operating unit and call station' PT1002-A1 is designed to be mounted
on a front door of a Novigo Core cabinet.
Use the provided cables and 'Call station interface (RS485)' PTO2008-A1 to
connect the PT1002-A1.
6.2.1 Mounting
The 'System operating unit and call station' PT1002-A1 is designed to be mounted
on a front door of a Novigo Core cabinet in place of the mounted blind plate.
Fig. 39: PT1002-A1 unmount front door blind plate
1. Take off the earth connection at the blind plate of the Novigo Core cabinet font
door.
2. Unscrew the 8 screws of the blind plate.
3. Remove the blind plate.
4. Insert the PT1002-A1.
5. Use the 8 screws to mount the PT1002-A1.
6. Mount earth connections on the top and bottom of the PT1002-A1 to the
cabinet door.
7. Mount the delivered PTO2008-A1 at the DIN rail of the cabinet.
8. Print and insert inscription stripes.
9. Configure and install the PT1002-A1.
