Configuration
Configuring the routing table
6
39
Building Technologies
A6V10403182_a_en
Fire Safety & Security Products
30.09.2014
each route: the higher the number (cost), the lower the corresponding
priority.
4. Add as many routes as required by your network configuration.
Routing table configuration
Checking the routing table
The configuration has been downloaded to the NK8237 unit.
1. Select the NK8237 node.
2. In the Routing tab, click the Get Info button to upload the routing configuration
from the selected NK8237 unit.
- The updated information populates the list in the Routing Info section.
3. Check that the uploaded table actually matches the configured table.
Inconsistencies will indicate a configuration error or network problems.
At this point, you can be sure that the unit can access the external subnets
over the configured routes.
Note: Use the Ping button in the Tools tab to check the actual connectivity
between the unit and IP devices on the subnets.