Configuring the MT8001
28
Building Technologies
048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc
Fire Safety & Security Products
06.2009
5
Configuring the MT8001
5.1
Configuration checklist
DMS Configuration Process Overview
The configuration checklist is a general guide to the configuration process. The or-
der in which you perform the tasks in the checklist may vary depending on your
personal preference. This is not an absolute guide, but rather lends context to the
tasks discussed in this manual.
Note:
A similar configuration list is provided in the DMS Network, Fire & Intrusion
Connectivity Guide. While the two lists are similar, they are not identical, as each
product has specific characteristics that impact this process. The list in the Con-
nectivity Guide serves as an overview of DMS product configuration in general,
while the list provided below is a list of the actual steps in the MT8001 configura-
tion process.
The following abbreviations are used this table:
−
DMS-CG – DMS Network, Fire & Intrusion Connectivity Guide
(document n. A6V10062425)
−
SPECS – Configuration specifications (agreed upon with the customer)
Items needed for configuration
Microsoft ActiveSync Installed on your PC
Composer and plug-ins installed on your PC
A “Block diagram” of the plant configuration with addresses
All subsystem metafiles
The customer’s preferences for MT8001 behaviour (from customer)
List of users and permissions (from customer)
List of commands for individual users, and icons to associate with them (from
customer)
CAD Maps and treatment procedures (from customer)
Please read the note about this in section
on page
.
Bitmap files - background screens, command buttons and icons (from customer)
List of entries for completing a report – entries should be 21 characters or less
(from customer)
DMS8000 Network, Fire & Intrusion Connectivity Guide (document no.
A6V10062425)
DMS8000 Graphical Map Configuration Guide (document no. A6V10062441)
