©
Sieme
ns
AG
2003, C:\Projekte
\Siem
ens\10210-0
01\CF62\Produkt\cf
62_tm
o_
am
_fug\fug\A65_Setup
.fm
Settings
72
VAR Langua
ge: en; V
A
R issue
date: 040413
left page (72)
of CF62 Leopard TMO FUG us, A31008-H6050-A50-1-4A19 (25.06.2004, 14:28)
Call Setup
§Menu§
K
m
K
Call Setup
K
Select function.
Hide ID
b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on
the service providers).
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call Waiting
b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
Call Forward
You can specify when calls are to
be forwarded to your mailbox or
other numbers.
Set up call forwarding (example)
The most common condition for call
forwarding is, for example:
All Unanswered
b
I
Select
All Unanswered
.
(Includes the conditions
Not Reachable
,
No Reply
,
Busy
, see below)
E
Press.
Set
Select.
J
Enter the phone number
to which the caller will be
forwarded (If not already
entered)
Or
·
Select this phone number
from the Addressbook/
Phonebook or via
§Mailbox§
.
§OK§
Confirm. After a short
pause, the setting is con-
firmed by the network.
All Calls
b
All calls are forwarded.
n
Symbol in the top line of
the display in standby
mode.
Not Reachable
Calls are forwarded if phone is
switched off or out of range.
No Reply
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Call forwarding occurs if a call is in
progress. If
Call Waiting
is activated
(page 72), you will hear the call
waiting tone during a call.
Status Check
You can check the current forward-
ing status for all conditions.