Siemens MindConnect IoT2040 Getting Started Download Page 47

Page: 47 / 96

Onboarding MindConnect Elements

6.5 Enable connection to MindConnect Element

Getting Connected to MindSphere
Getting Started, 05/2018

6.5

Enable connection to MindConnect Element

To use a MindConnect Element with MindSphere you have to enable the connection. Within

enabling the connection you can assign a MindConnect Element to an asset.

Procedure

To enable the connection to the MindConnect Element proceed as follows:
1. Select the asset in the "Asset" tab.
2. Click on the asset icon, e. g. "MindConnect Nano".

The "Create MindConnect" screen appears.

3. Enter the unique ID from your hardware.

Result

You have enabled the connection to the MindConnect Element.

Summary of Contents for MindConnect IoT2040

































































































Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Related manuals for MindConnect IoT2040

Brands by name

Popular brands

Siemens MindConnect IoT2040, Getting Started

Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Related manuals for MindConnect IoT2040

Brands by name

Popular brands