Page 8
Milltronics MMI Belt Scale – INSTRUCTION MANUAL
7ML19985DR02
5.
Release the shipping stops on each MSI in order to free the weighing mechanism.
Loosen screws ‘A’ and rotate both shipping stops inward until the underside slots
slide around the screws ‘B’. Tighten screws ‘A’ to secure in place.
6.
The idlers in the weighing area must be properly aligned and leveled by shimming
the scale idler (S#), the two approach (A#) and the two retreat idlers (R#) until they
are within ± 0.8 mm (1/32") of each other. Be sure to check that the idlers are
centered and squared to the conveyor during the shimming process.
‘B’ shoulder bolts
shipping stop
shipping stop
‘A’ screws
C
C
90°
center of idler
to be in line
material flow
idlers must be square to stringers
alignment of idlers
A2 to R2 to be within
± 0.8 mm (1/32”)
R 2
R 1
A 1
A 2
S 1
S2
