Power module PM-E DC24..48V/AC24..230V (6ES7138-4CB11-0AB0)
Manual, 04/2007, A5E01120024-01
7
Properties
1
1.1
Power module PM-E DC24..48V/AC24..230V (6ES7138-4CB11-0AB0)
Properties
The power module PM-E DC24V..48V/AC24..230V
● Monitors the supply voltage for all the electronic modules in the voltage group. The
supply voltage is fed in by means of the TM-P terminal module.
● Can be used universally and can be assigned parameters for DC and AC load voltage for
use with any electronic module.
● Is required at least once for the ET 200S (to the right of the interface module).
Exception: Design of the ET 200S with an IM151-1 COMPACT
● Control interface (PIQ) and feedback interface (PII) in the process image for option
handling.
● The current status of the power module is stored in the status byte in the process input
image (PII). This is updated irrespective of whether the "No Load Voltage" diagnosis has
been enabled.
● Is additionally equipped with a replaceable fuse (5 mm x 20 mm).
Replacing the fuse:
1
2
①
Screwdriver with 3 mm blade
②
Fuse
