Preparatory work
3 - 5
Siemens-Elema AB
Register 03
SP B7-230.033.07
Page 5 of 8
Mammomat 1000/3000
Solna, Sweden
Rev. 03
11.99
SPS-UD
Installation and Start-Up
Protective strips for the metal curtain
3
The edges of the metal curtain are very sharp and are therefore provided with protective
strips (1) on delivery. These strips must always be applied onto the edges of the metal
curtain during service and maintenance work.
Holders (2) for storing the protective strips when not in use, are provided on both sides of
the curtain, see Fig. 7.
Fig. 7
Protective strips for the metal curtain
The protective strips must be removed from the metal curtain
before any vertical adjustment of the swivel-arm system is
performed.
2
1
MA
M000
84
CAUTION
