background image

7

After-sales service

Our after-sales service is there for you if your appliance needs 
to be repaired. We will always find the right solution in order to 
avoid unnecessary visits from a service technician.

When calling us, please give the product number (E no.) and 
the production number (FD no.) so that we can provide you with 
the correct advice. The rating plate with these numbers can be 
found inside the appliance (remove the metal mesh grease 
filter to gain access).

You can make a note of the numbers of your appliance and the 
telephone number of the after-sales service in the space below 
to save time should it be required.

Please be aware that a visit by an after-sales engineer will be 
charged if a problem turns out to be the result of operator error, 
even during the warranty period.

Please find the contact data of all countries in the enclosed 
customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can 
therefore be sure that the repair is carried out by trained service 
technicians who carry original spare parts for your appliances.

Special accessories

(not supplied)

Note: 

Follow the installation instructions supplied with the 

accessories.

--------

E no.

FD no.

After-sales service

O

GB

0344 892 8999 
Calls charged at local or mobile rate.

IE

01450 2655 
0.03 € per minute at peak. Off peak 0.0088 € per 
minute.

Accessory

Order number

Backboard, 60 cm

LZ50660

Backboard, 90 cm

LZ50960

Summary of Contents for LC60BA530









Reviews: