background image

Considerable injuries may be caused by faulty repairs. 
Repairs to the appliance must only be carried out by 
a trained technician. If a repair is required, please call 
the after-sales service.

When cleaning things around the cooker hood (such 
as ceiling, cabinet) which may touch the hood, please 
war protection glove or take other protection 
measures to prevent injuries.

The manufacturer accepts no responsibility for 
damage which arises as a result of disregarding the 
instruction manual.

If your cooker hood does not work properly, check the 
possible explanations in “Trouble Shooting” page 
before calling our customer service. When you call, 
please quote the E-Nr. (product number), serial No. 
and FD (production date). Information are shown on 
the rating label as below:

Customer Service

Tips

LC65S953..

Label Positioning

BSH Electrical Appliances (Jiangsu) Co.,Ltd

Hood Type

E-Number

Type

Input

Elec.Control

Serial No.

Origin

Voltage/Frequency

Color/Material

FD No.

Avoid turning on the gas hob without a pan or with an empty pan, so as 
to protect the product.

Select a proper detergent, to avoid the coating peels off the surface of 
the product.

The cooker hood needs to be cleaned regularly to remove water and 
grease stains on the surface. (make sure no water enter the eletric 
components such as switch and motor)

Wear rubber glovers when cleaning the cooker hood, to prevent your 
finger from being hurt in cleaning.

Unscrew the screw nut with hands in a clockwise direction.

Pull off the electric plug before cleaning.

Laymen are forbidden to change and detach internal circuits of the 
electric appliance.

Attention

17

Summary of Contents for LC38S953 Series





















Reviews: