background image

en 

Cleaning and servicing

8

1.

Open the filter cover by pulling it downwards.

2. ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

Open the locks on the grease filters.

3.

Remove the grease filters from the holders.
To prevent grease from dripping, hold the grease fil-
ter horizontally.

8.5 Cleaning grease filters manually

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents.

2.

Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Use a brush to clean the grease filters.

4.

Rinse the grease filters thoroughly.

5.

Allow the grease filters to drain.

8.6 Cleaning grease filters in the
dishwasher

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

ATTENTION!

The grease filters may become damaged if they are
squeezed.

Do not squeeze the grease filters.

Note: 

When cleaning the grease filter in the dish-

washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents.

2.

Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Start the dishwasher.
Select a temperature of no more than 70 °C.

4.

Allow the grease filters to drain.

8.7 Fitting grease filters

ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

1.

Fit the grease filters.

2.

Fold the grease filters upwards and engage the
locks.

3.

Make sure that the locks engage.

4.

Close the filter cover.

8.8 Odour filter for recirculating air mode

Odour filters bind odorous substances in air recircula-
tion mode. Regularly replaced odour filters guarantee a
high level of odour removal.
With normal use (approx. one hour a day), the odour fil-
ter must be replaced every 4  months. The odour filter
cannot be cleaned or regenerated.
You can obtain odour filters from the after-sales service
or the online shop. Only use original odour filters.

Removing the odour filter

1.

Remove the grease filters.

2.

Remove the odour filter from the holder.

Summary of Contents for LB89586AU





















Reviews: