2 / 18
Siemens
RDF600KN, RDF600KN/VB, RDF600KN/S
A6V11425204_en--_d
Smart Infrastructure
Semi flush-mount communicating room thermostats
2020-02-21
Additional RDF600KN/S features:
·
Four buttons to control KNX actuators via KNX S-mode
(functions: switching, dimming, blinds control, 8-bit scene)
Use
Room temperature control (heating or cooling) in individual rooms and zones by
means of:
·
2-pipe fan coil units
·
2-pipe fan coil units with electric heater
·
4-pipe fan coil units
·
Compressors in DX-type equipment
·
Compressors in DX-type equipment with electric heater
The thermostats control:
·
One 1-speed or 3-speed fan
·
One or two on/off valve actuators
·
One on/off valve actuator and one 1-stage electric heater
·
One 3-position valve actuator
·
One 1-stage compressor in DX-type equipment, or one 1-stage compressor with
electric heater
Used in systems with:
·
Heating or cooling mode
·
Automatic heating/cooling changeover
·
Manual heating/cooling changeover
·
Heating and cooling mode (e.g. 4-pipe system)
The room thermostats are delivered with a fixed set of applications.
The relevant application is selected and activated during commissioning using one
of the following tools:
·
Synco ACS
·
ETS
·
Local DIP switch and HMI