en
29
Switching
the appliance on
Fig.
2
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. The
temperature display 2 flashes.
Press the temperature selection
button 4. The warning signal switches
off.
When the freezer compartment has
reached the set temperature,
the temperature display 2 is lit.
Operating tips
■
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig.
1
/10,
to the required setting.
We recommend a medium setting
(of e.g. 2–3).
Higher settings lower the temperature in
the refrigerator compartment.
Select a higher setting (e.g. 4–5) only
temporarily if:
■
the ambient temperature is high,
■
door is opened frequently,
■
large quantities of food are placed in
the refrigerator compartment.
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 2.
We recommend a factory setting of -
18 °C in the freezer compartment.
