5
/18
02.2019
H47.ELEKS005EN-00
5
/18
Operating instructions
Electromechanical systems
A-opener 2.1
•
Never use cleaning agents that are aggressive or
contain solvents. This could damage the surfaces of
the components.
•
Both the contractors and the users must be trained
in the operation and maintenance of the multi-point
lock.
1.6 Dimensions
All measurements are given in mm.
1.7
Visual indicators
1.7.1
Symbols used
The following icons are used in this document:
Useful information or advice
Do not use mechanical force
Wear safety goggles
Wear safety footwear
Wear safety gloves
Continue reading the instructions
at the corresponding point
1.7.2
Other types of indicators
Below is a list of symbols used in these instructions and
their meanings:
f
Items of text with this marking in front of them are
instructions that must be followed in the specified
order.
•
Items of text following this marker are found in lists.
–
Items of text following this marker are found in
subordinate lists.
" " Items of text in quotation marks are cross-refe
-
rences to other chapters or sections.
1.8 Appropriate disposal
Electrical devices should not be disposed of as household
waste. Bring the device, accessories and packaging to an
environmentally-friendly recycling facility.
1.9
Causes of damage
Do not drill through the door leaf in the area of the
gear box when the lock or the multi-point lock is instal
-
led.
The spindle must not be hit through the lock nut with
force.
Summary of Contents for KFV
Page 2: ......
