Siemens KF96NV Series, Information For Use

Page: 38 / 52

en
Additional functions
38
3.
Set the required temperature.
→
Page 38
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The front and side panels of
the housing heat up occasionally.
This prevents condensation from
forming.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Disconnect the appliance from the
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press repeatedly until the
temperature display (refrigerator
compartment) shows the required
temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the freezer compartment
temperature
▶
Press repeatedly until the
temperature display (freezer com-
partment) shows the required tem-
perature.
The recommended temperature in
the freezer compartment is
−18 °C.
7.5 Button lock (childproof
lock)
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Switching on the button lock
▶
Press and hold for
three seconds.
a
lights up.
Switching off the button lock
▶
Press and hold for
three seconds.
a
goes out.
8 Additional functions
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note:
When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
▶
Press repeatedly until
lights up.
a lights up in the temperature dis-
play (refrigerator compartment).
Note:
After approx. 6 hours, the ap-
pliance switches to normal operation.