HSAAP_Pref.fm
A31003-W1110-U101-1-7619, February 2007
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
5
Welcome
About this getting started guide
1
Welcome
This manual contains instructions for the installation and configuration of the HiPath Wireless
Standalone Access Point.
●
The HiPath Wireless Standalone Access Point is intended for home and office use.
●
Never open the HiPath Wireless Standalone Access Point. If you encounter problems,
please contact qualified personnel.
●
Only use genuine accessories. The use of any other accessories is dangerous and will void
both the warranty and the CE mark.
●
Ensure that the HiPath Wireless Standalone Access Point does not come into contact with
any liquids including tea, coffee, juice, or soft drinks.
1.1
About this getting started guide
The Standalone Access Point is a wireless LAN access point using the 802.11 wireless
standards (802.11a+b/g) for network communications. Also, the Standalone Access Point
bridges network traffic to an Ethernet LAN. The Standalone Access Point is physically
connected to a LAN infrastructure. The Standalone Access Point radios can be enabled or
disabled in the user interface.
The
HiPath Wireless Standalone Access Point Getting Started Guide
describes how to install,
configure, and manage the HiPath Wireless Standalone Access Point.
>
Please read the following safety instructions and this entire manual before first use.
Please also ensure that any children who have access to the HiPath Wireless
Standalone Access Point are informed of these safety instructions.
>
The Standalone Access Point will operate on the radio bands available in your
country. For more information, see Chapter 2, “Regulatory information”.
