HSAAP_Regulatory.fm
A31003-W1110-U101-1-7619, February 2007
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
7
Regulatory information
2
Regulatory information
This chapter provides the regulatory information for the Standalone Access Point—AP2630
and AP2640 (AP26XX series).
Configuration of the Standalone Access Point frequencies and power output are controlled by
the regional software license and proper selection of the country during initial installation and
set-up. Customers are only allowed to select the proper country from their licenced regulatory
domain related to that customer’s geographic location, thus allowing the proper set-up of
Standalone Access Points in accordance with local laws and regulations. The Standalone
Access Point must not be operated until properly configured with the correct country setting or
it may be in violation of the local laws and regulations.
7
Warnings identify essential information. Ignoring a warning can lead to problems
with the application.
7
Changes or modifications made to the Standalone Access Point which are not
expressly approved by Siemens could void the user's authority to operate the
equipment.
Only authorized Siemens service personnel are permitted to service the system.
Procedures that should be performed only by Siemens personnel are clearly
identified in this guide.
