Siemens HiPath 4000 Operation Manual Download Page 30

Page: 30 / 164

Applications Available on Your OpenStage Phone

Multi-line view

Two tabs are displayed on the telephony interface:
•

"My phone" tab - represents the primary line or the line view of a se-
lected line

page 29

•

"Overview" tab - configurable overview of the secondary lines

Press

to open this view.

Example:

The status icons provide information about the state of the relevant line.

Icon

Explanation

Call for the corresponding line.

Call for a line with suppressed ring tone.

The hold reminder was activated.

The line is currently not available.

The line is busy.

Please note the LED displays for the line keys

page 116.

Line status

Line name

Status icon

My phone

Line 1
Line 2

My phone

Overview

Shift

My phone

Ln 1
Ln 1

Ans

Bohr, Niels
Line busy

0123456632419

Line key

labeling

page 91

Summary of Contents for HiPath 4000





































































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operation Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands