Workpoint Clients
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-96
HiPath 3000/5000 V9, Service documentation
wclient.fm
optiPoint 500
10.5.3.1
optiPoint analog adapter
The optiPoint analog adapter allows an analog device (such as, telephone (DTMF only), group
3 fax, modem, cordless telephone) to be connected to an optiPoint 500 telephone.
The analog device connected can send and receive calls on the interface to the system regard-
less of the optiPoint telephone’s connection status, as long as a B channel is available.
The adapter must always have a
for operating the connected analog device.
T/R interface properties
●
Supply current: 30 mA
●
Busy signal when both B channels are busy
●
Ring sequence: 2.2
●
Supports only DTMF with Flash
●
No ground signaling allowed
●
Does not support: VoiceMail server with T/R interface, message waiting lamp, dictating
equipment, speaker, announcement device (such as start/stop).
Figure 10-45
optiPoint analog adapter
MW6 (RJ11) socket assignments:
Pin
Signal
1
Free
2
Free
3
T (Tip)
4
R (Ring)
5
Free
6
Free
6
1
Summary of Contents for HiPath 3000 Series
Page 1252: ......
