Boards for HiPath 3000
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
3-364
HiPath 3000/5000 V9, Service documentation
boards.fm
Options
3.4.4
ANI4R (for selected countries only)
Introduction
The ANI4R (Automatic Number Identification Rack) board is responsible for receiving station
numbers modulated using the CPFSK method, demodulating them, and forwarding them to the
HiPath 3500 or HiPath 3300 base system. In V4.0 SMR-7 or later, the station name is analyzed
in addition to the call number and shown on the telephone display.
Each ANI4R module can serve four trunks. It contains the external trunk board hardware inter-
faces (TMGL4R) and the options bus interface.
Interfaces
>
NOTE
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, “Lightning Protec-
tion”.
>
If ANI4R is installed as option 1 or 2,
board must be inserted in slot 4, 6 or
8 (slots 6 and 8 not available with HiPath 3300).
Figure 3-131
ANI4R (for selected countries only) (S30807-Q6917-Z103)
To OPALR, or previous option
Board side
TMGL4R
X1
X2
X3 (10-pin MW10 jack)
ANI4R
1
10
Summary of Contents for HiPath 3000 Series
Page 1252: ......
