Boards for HiPath 3000
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
3-124
HiPath 3000/5000 V9, Service documentation
boards.fm
Peripheral boards
3.3.10
SLA8N (not for U.S.), SLA16N, SLA24N
Introduction
The following peripheral boards can be used in HiPath 3550:
●
SLA8N (Subscriber Line Analog) with eight analog T/R interfaces (not for U.S.)
●
SLA16N (16 analog interfaces)
●
SLA24N (24 analog interfaces)
Switches and LEDs
The operating mode (short or long line with the appropriate flash times) can be set up for each
subscriber line interface with HiPath 3000/5000 Manager E (the menu settings: Set up station
–> Station –> Param –> Flags).
>
NOTE
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, “Lightning Protec-
tion”.
Figure 3-45
SLA8N (not for U.S.), SLA16N, SLA24N (S30810-Q2929-X200, -X100, -X)
H1 (green)
H2 (red)
LEDs
Lockout switch S1
(position = free, factory default)
Summary of Contents for HiPath 3000 Series
Page 1252: ......
