Siemens HiPath 1120, Programming Manual

Page: 124 / 180

Step by Step
Programming a Digital Trunk
124
or
Press this key.
Initial state for Programming Mode.
Busy Signal
This features allows all telephones in the "Busy Signal"
Group to automatically switch to a busy signal when an
extension of the group (that activate this feature) has a
call in progress.
External calls no longer ring (caller hears a busy signal).
This is useful when there is only one person of the
group available and this person does not want to be
disturbed by other external calls while there’s a conver-
sation in progress. The caller will think that the called
person is busy at the moment.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Enter the slot for the MSN number.
or Choose a period of time for the assignment of MSN to
extensions:
= Day
= Night
... Enter the slot for the group with a busy signal.
... Enter the next slot for the group with a busy signal.
or
Press this key.
Initial state for Programming Mode.
#
0 0 4
0 1 0 4 0 1
1 2
1
2
0 1 0 4 0 1
0 1 0 4 0 1
#
This feature is valid only for digital lines with
MSN numbers. It is not valid if more than one
extension is configured for a MSN number.
If a Fax/DID module is installed and configured
for digital lines, this feature will be invalid.