Siemens HiPath 1100, Service Manual

Page: 30 / 389

System Data
2-30
Service Manual
System expansion limitations
2.5 System expansion limitations
During system installation (see “Installing modules” on page 4-138) please consider
characteristics, recommendations and limitations of the modules that will comprise the final set.
We therefore recommend that you read this chapter carefully, where you will find the maximum
capacities of each module and how it interacts with the other components.
Basic configuration: HiPath 1120 HiPath 1150 HiPath 1190
External analog lines 2 0
Analog extensions 8 10
System telephone
interface (KS)
*
4 8
Expansion modules:
EB 010 (10 extensions) 0 4 14
EB 012 (12 extensions) 0 3 11
EB 202 (2 external lines and 2 extensions) 0 4 16
EB 204 (2 external lines and 4 extensions) 2 0
EB 206 (2 external lines and 6 extensions) 0 4 16
EB 210 (2 external lines and 10
extensions) 0 4 11
EB 200 (2 external lines) 2 4 16
EB 400 (4 external lines) 0 3 10
EB 800 (8 external lines) 0 1 5
S
0
module 1 2
TME1 module 0 1 2
U
P0/E
module (optiPoint): 1 1 or 2
(see “CTR-UP0/E module” on
page 3-79)
CD 16 module (KS) 0 1
Optional modules:
**
LAN interface modules
(ADSL, SLIMC, SADSLIM, LIMC or
ADSLIM) 1
EVM module 1
Music module 1 on board
TFE entrance telephone interface 20
Total System Capacity:
***
: