Siemens Hicom 300 H Operating Instructions Manual Download Page 31

Page: 31 / 167

Calling several persons simultaneously

Step by Step

Calling several persons
simultaneously

Making a second call (consultation)

During a call in progress you can set up a second call,
for example, to obtain information. The first party is
placed on hold.

Confirm.

Make your call to the second party.

Release the second call – return to the first call:

Confirm.

Alternating between two calls
(toggling)

Precondition:

You have either made a second call (see

above) or taken a waiting call (

page 22).

To switch to the waiting party:

Select and confirm.

Select and confirm (used in US).

Release the present call – return to the other call:

Select and confirm.

Setting up a conference call:

Confirm.
An alerting tone indicates that all three users have been
interconnected to form a conference circuit.

Consultation?

Release and return?

Toggle/Connect?

Toggle?

Release and return?

Conference?

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands