Siemens Hicom 300 H Operating Instructions Manual Download Page 158

Page: 158 / 167

Step by Step

Advice for users

158

Possible cause:

a) Attempt to use a barred function.
b) PIN entered incorrectly.

Possible response:

a) Contact your service personnel for authorization to
activate this function.
b) Enter the PIN correctly.

Possible cause:

Number not entered completely, star or pound key not
pressed.

Possible response:

Enter the number or code correctly
(or as instructed).

Possible cause:

Data transmission in progress.

Possible response:

Wait and then try again later.

Restart the Telephone

Other errors (e.g. the display shows "System forced
logoff") can be repaired sometimes by restarting the te-
lephone.

:=@

Press the keys simultaneously and follow further
prompting.

Who to contact if a problem occurs

Contact your service personnel for problems lasting
longer than, for example, 5 minutes.

Not authorized

Not allowed

Not available

Protected

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands