Siemens Hicom 300 H Operating Instructions Manual Download Page 157

Page: 157 / 167

Advice for users

157

Step by Step

Dealing with error messages on the
display

Possible cause:

Maximum input time exceeded.
Handset not replaced.

Possible response:

Enter digits more quickly; avoid lengthy pauses be-
tween keystrokes.

Possible cause:

System is overloaded, no
lines free, queue is full.

Possible response:

Wait and then try again later.

Possible cause:

a) The function is not available at this time.
b) The number you dialed does not exist.

Possible response:

a) Wait and then try again later.
b) Enter the number correctly or call the attendant.

Possible cause:

Speed dialing number does not exist, timed reminder
entered incorrectly, barred or inadmissible input, pre-
condition not met (for example, attempt to toggle with-
out a second party), incomplete dialing.

Possible response:

Correct your input, select a permissible option, enter
the number in full.

Time exceeded

Please try later

Currently not accessible

Not possible

Incorrect input

Nothing stored

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands