Siemens HG72G.054M, Instructions For Installation And Use Manual

Page: 28 / 36

28
Appliance dimensions
Take note of the specified dimensions.
HG72G7155M, HG72G7125M, HG72G6155M, HG72G5154M,
HG72G4124M
:
A=95-160 mm; B=845-910 mm
HG72G3054M,
HG72G2054M
:
A=90-145 mm; B=840-895 mm
HG72G8155M
:
Adjacent units
Adjacent units must be made of non-combustible material.
Adjacent unit fronts must be heat-resistant up to at least 90 °C.
If the appliance is installed close to other kitchen units, you
must comply with the minimum distances specified in the
diagram.
Rating plate
The technical data for the appliance can be found on the rating
plate.
The rating plate is located on the inside of the storage
compartment flap.
The setting values are specified on a label on the appliance
packaging.
Enter the product number (E no.), production number (FD no.),
factory settings for the type of gas/gas pressure and, if
applicable, the converted gas type into the table below. The
changes made to the appliance and the type of connection are
crucial for the safe and correct operation of the appliance.
Guidelines for ventilation
This appliance may only be set up in a sufficiently ventilated
room and according to the applicable regulations and
ventilation requirements.
Please note that the air volume required for combustion must
not be below 2 m³/h per kW of power (see kW total power on
the rating plate).
PP
%
$
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
E no. FD no.
After-sales service
O
Type of gas/gas pressure
Factory setting
Type of gas/gas pressure
Conversion
PLQ
PP PLQ
PP
PLQ
PP
PLQ
PP
PLQ
PP