Siemens HC748 40 Series, Instruction Manual

Page: 13 / 32

13
relevant heat setting display. On the control panel, change the
cooking time or touch the "0".
To set a cooking time for another hotplate:
Touch the 0 repeatedly until x lights up brightly over the
relevant heat setting display. Set the cooking time.
Displaying the cooking time for more than one hotplates:
Touch the 0 repeatedly until x lights up brightly over the
relevant heat setting display. The remaining cooking time for
this hotplate is displayed.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking time then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to activate the automatic timer in the
Basic settings section.
You can switch off the automatic timer for a hotplate or change
the cooking time. Do so by touching the
0
symbol repeatedly
until
x
lights up brightly over the relevant heat setting display.
On the control panel, change the cooking time or touch the "0".
Timer
The alarm is independent of all other settings on the hob. It
operates in the same way as a normal kitchen alarm. When the
set time has elapsed, a signal sounds. You can set a time of up
to 99 minutes.
1.
Touch the 0 symbol repeatedly until S lights up for the
alarm.
N ‹‹ and min appear in the timer display.
2.
Set the time for the alarm on the control panel.
A signal sounds once the time has elapsed. ‹‹ appears in the
timer display and S lights up brightly. The display goes out
after 10 seconds.
Changing or cancelling the time
Touch the 0 symbol repeatedly until S lights up. Change the
time for the alarm on the control panel or press 0.
Automatic switch-off
If a hotplate is in operation for a long time without the setting
being changed, the automatic switch-off is activated.
The hotplate stops heating.
” and ‰ flash alternately in the heat
setting display.
To resume heating, touch any symbol. The display goes out.
You can make new settings.
At what point the switch-off is activated depends on the heat
setting selected (1 to 10 hours).
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered. To prevent this from happening, your
hob has a wipe protection function.
Briefly touch the
# symbol. The indicator above the symbol
lights up. The control panel is locked for approx. 30 seconds.
You can now wipe over the control panel without altering any
settings.
Note:
The main switch is excluded from this function. You can
switch off the hob at any time.
Basic settings for the hob
Your hob has various basic settings, which you can adjust to
suit your needs at any time.
The table shows the basic settings that you can change on the
hob.
Changing the basic settings
The hob must be switched off.
The table shows which functions allow you to change the basic
settings.
1.
Switch on the hob using the main switch.
2.
Within the next 10 seconds, touch the
0
symbol until
™‚
appears in the timer display.
‹ lights up on the right-hand heat setting display. This is the
basic setting.
3.
Touch the 0 symbol repeatedly until the desired function
appears, e.g.
™‡
.
Display Function Options
™‚
Automatic childproof lock
The hob is always locked once it is switched off.
‹
‚
= no*
= yes
™ƒ
Audible signal
Short sound, which confirms that a symbol has been
touched, or a long tone, which indicates that the hob has
been operated incorrectly.
‹
‚
ƒ
= All audible signals switched off
= Confirmation signal switched off, incorrect opera-
tion signal switched on
= All audible signals switched on*
™†
Automatic timer
All hotplates switch off after a preselected cooking time.
‹‹
‚ - ŠŠ
= Switched off*
= Cooking time after which the hotplates should
switch off
™‡
Length of the timer end signal
The signal indicates that the time has elapsed or a hot-
plate has automatically been switched off.
‚
ƒ
„
= 10 seconds*
= 30 seconds
= 1 minute
™ˆ
Power management function
Limits the total power of the hob. There are 18 levels.
Moving down a level decreases the power of the hob by
500 W.
‚
‚ - Š
‹
= 1,000 W minimum power
= 1,500-9,000 W
= 9,500 W maximum power*
™Š
Selected time for a hotplate
The hotplate which was last selected remains selected
without limitation or the selected time is limited to
10 seconds. Thereafter, you must make new selections.
‹
‚
= unlimited*
= limited to 10 seconds until settings are made
™‹
Reset basic settings
Resets all changes back to the basic settings
‹
‚
= no*
= yes
* Basic setting