en
Rapid heating
12
7.
When the operation has finished, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approx. 15 to
20 minutes.
Note:
If necessary, change the basic setting for the
lighting again.
9 Rapid heating
To save time, rapid heating can shorten the preheat-
ing time for set temperatures over 100 °C.
Rapid heating is possible for the following types of
heating:
¡
4D hot air
¡
Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:
Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
Rapid heating automatically switches off as of a set
temperature of 200 °C.
2.
Press "Rapid heating".
a
"On" is in the tile.
3.
Use
to start the operation.
a
Rapid heating starts.
a
Once rapid heating is complete, a signal tone
sounds. "Off" appears for "Rapid heating" .
4.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press "Rapid heating".
a
For "Rapid heating" "Off" appears on the display.
10 Time-setting options
For an operation, you can set the cooking time and the
time at at which the operation should be ready. The
timer runs independently of the appliance during the
operation.
Time-setting
option
Use
Cooking time
If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
Ready at
Along with the cooking time, you can
set the time at which you want cook-
ing to end. The appliance starts up
automatically so that it finishes cook-
ing at the required time.
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
10.1 Setting the cooking time
You can set the cooking time for the operation of up to
24 hours.
Requirement:
An operating mode and temperature or
setting have been set.
1.
Press "Cooking time".
2.
To set the cooking time, press the relevant time
value, e.g. hour display "h" or minute display "min."
a
The selected value is marked in blue.
3.
Set the cooking time using or or via the adjust-
ment bar. Or enter the cooking time directly via the
number field .
If required, use to reset the adjustment value.
4.
Press "Apply".
5.
Use
to start the operation.
a
The appliance starts to heat and the time counts
down.
a
Once the cooking time has elapsed, a signal tone
sounds. A note appears on the display confirming
that the operation has finished.
6.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
Changing the cooking time
You can change the cooking time at any time.
1.
Press the cooking time.
2.
Change the cooking time using or , or via the
adjustment bar. Or enter the temperature directly via
the number field .
3.
Press "Apply".
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press the cooking time.
2.
Reset the cooking time using .
Note:
For operating modes that always require a
cooking time, the appliance resets the cooking time
to the preset value.
3.
Press "Apply".
10.2 Setting "Ready at"
You can delay the time at which the cooking time for
the operation should be ready by up to 24 hours.
Requirements
¡
An operating mode and temperature or setting have
been set.
¡
A cooking time is set.
1.
Press "Ready at".
